Our Products
Polymer Additives
Petrochemical Catalyst
Oil Drilling Chemicals
- Bentonite (Calcium Bentonite & Sodium Bentonite)
- Calcium Bromide
- Carboxymethyl Cellulose Sodium (CMC)-Oil Drilling Grade
- Polyacrylamide (PAM)
- Polyanionic Cellulose (PAC)
- Xanthan Gum
- Sodium Lignosulphonate
- Potassium and Sodium Asphalt Sulfonate
- Potassium Acetate
- Potassium PolyAcrylate
- Sodium Gluconate
- Zinc Bromide
Molecular Sieve
Water Treatment Chemicals
- Amino Trimethylene Phosphonic Acid
- 1-Hydroxy Ethylidene-1,1-Diphosphonic Acid
- Ethylene Diamine Tetra (Methylene Phosphonic Acid) Sodium
- Ethylene Diamine Tetra (Methylene Phosphonic Acid) EDTMPA (Solid)
- Diethylene Triamine Penta (Methylene Phosphonic Acid)
- 2-Phosphonobutane -1,2,4-Tricarboxylic Acid
- Polyhydric alcohol phosphate ester
- 2-Hydroxy Phosphonoacetic Acid
- HexaMethyleneDiamineTetra (MethylenePhosphonic Acid)
- Bis(HexaMethylene Triamine Penta (Methylene Phosphonic Acid)) BHMTPMPA
Recycling Industry
Ethylene Diamine Tetra (Methylene Phosphonic Acid) Sodium (EDTMPS)
CAS No. 1429-50-1
Molecular Formula: C6H12O12N2P4Na8
Molecular weight: 612.13
Properties:
EDTMPS is nitrogenous organic polyphosphonic acid, a part of cathodic corrosion inhibitor.Its corrosion inhibition is 3~5 times better than that of inorganic polyphosphate. It can be fully dissolved in water, innocuous and none pollution to environment, has good chemical stability and thermal tolerance. It shows excellent scale inhibition ability under temperature 200℃. It can dissociate into 8 positive-negative ions, thus can chelate with many metal ions to form polymer reticulation complex, to destroy the normal crystallization of calcium scale.EDTMPS shows better antiscale effects to calcium sulfate and barium sulfate.
Specification:
Items |
index |
|
Appearance |
Clear yellow to umber transparent liquid |
|
Active component (EDTMPS)% |
28.0min |
|
Organic phosphonic acid (asPO43- )% |
10.0min |
|
Phosphorous acid (as PO33-)% |
5.0max |
|
Phosphoric acid (asPO43- )% |
1.0max |
|
pH (1% water solution) |
9.5-10.5 |
|
Density (20℃) g/cm3 |
1.25min |
|
Chloride (as Cl-)% |
3.0max |
Usage:
EDTMPS can be used as corrosion inhibitor in circulating cool water system and boiler water. It is a chelating agent in non-cyanogen electroplating industry and a water-softening agent in printing & dyeing industry. When used alone, 2~10mg/L is preferred. When built with HPMA by ratio EDTMP:HPMA=1:3, it can be used for low pressure boiler. It can also be built with BTA, PAAS and zinc salt.
Package
Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place.